From: Stephen Warren <[email protected]> The register writes performed by arch/arm/cpu/arm720t/tegra30/cpu.c enable_cpu_power_rail() set the voltage to 1.0V not 1.4V as the comment implies. Fix the comment.
Signed-off-by: Stephen Warren <[email protected]> --- arch/arm/cpu/arm720t/tegra30/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c index a80648389c7c..85a945bc7918 100644 --- a/arch/arm/cpu/arm720t/tegra30/cpu.c +++ b/arch/arm/cpu/arm720t/tegra30/cpu.c @@ -60,7 +60,7 @@ static void enable_cpu_power_rail(void) /* * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus. - * First set VDD to 1.4V, then enable the VDD regulator. + * First set VDD to 1.0V, then enable the VDD regulator. */ tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2); tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES); -- 1.8.1.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
