Instead of using a #define'd register offset, use a function that provides the PATA controller's base address.
This allows us to get rid of all such register offset definitions (at least for use in C files). Signed-off-by: Wolfgang Denk <[email protected]> Cc: John Rigby <[email protected]> --- include/configs/aria.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/aria.h b/include/configs/aria.h index d335a52..dde2a0e 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -512,7 +512,7 @@ #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC512X_PATA +#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() /* Offset for data I/O RefMan MPC5121EE Table 28-10 */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) @@ -526,7 +526,7 @@ /* Interval between registers */ #define CONFIG_SYS_ATA_STRIDE 4 -#define ATA_BASE_ADDR MPC512X_PATA +#define ATA_BASE_ADDR get_pata_base() /* * Control register bit definitions -- 1.6.0.6 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
