Set the active_slave to 1 as slave 1 is pinned out in dra72x base board
Signed-off-by: Mugunthan V N <[email protected]>
---
board/ti/dra7xx/evm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 073d151..955c16f 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -157,6 +157,8 @@ int spl_start_uboot(void)
#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
+extern u32 *const omap_si_rev;
+
static void cpsw_control(int enabled)
{
/* VTP can be added here */
@@ -183,7 +185,7 @@ static struct cpsw_platform_data cpsw_data = {
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
- .slaves = 1,
+ .slaves = 2,
.slave_data = cpsw_slaves,
.ale_reg_ofs = 0xd00,
.ale_entries = 1024,
@@ -254,6 +256,9 @@ int board_eth_init(bd_t *bis)
ctrl_val |= 0x22;
writel(ctrl_val, (*ctrl)->control_core_control_io1);
+ if (*omap_si_rev == DRA722_ES1_0)
+ cpsw_data.active_slave = 1;
+
ret = cpsw_register(&cpsw_data);
if (ret < 0)
printf("Error %d registering CPSW switch\n", ret);
--
1.9.2.459.g68773ac
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
