Hi Pierre,

On Apr 24, 2014, at 11:30 AM, Pierre Aubert wrote:

> This patch adds functions for read, write and authentication
> key programming for the Replay Protected Memory Block partition
> in the eMMC.
> 
> Signed-off-by: Pierre Aubert <p.aub...@staubli.com>
> CC: Pantelis Antoniou <pa...@antoniou-consulting.com>
> ---
> Changes in V5:
> - move changelog to the right place
> - change lib/Makefile for adding sha256 when CONFIG_SUPPORT_EMMC_RPMB is 
>  defined
> 
> V3, V4: no changes
> 
> Changes in V2:
> - use ALLOC_CACHE_ALIGN_BUFFER in rpmb.c instead of a static buffer for the
>  RPMB frames.
> 
> drivers/mmc/Makefile |    1 +
> drivers/mmc/rpmb.c   |  323 ++++++++++++++++++++++++++++++++++++++++++++++++++
> include/mmc.h        |   10 ++-
> lib/Makefile         |    1 +
> 4 files changed, 334 insertions(+), 1 deletions(-)
> create mode 100644 drivers/mmc/rpmb.c
> 
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 931922b..4c6ab9e 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_DWMMC) += dw_mmc.o
> obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
> obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
> obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
> +obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
> ifdef CONFIG_SPL_BUILD
> obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
> else
> diff --git a/drivers/mmc/rpmb.c b/drivers/mmc/rpmb.c
> new file mode 100644
> index 0000000..05936f5
> --- /dev/null
> +++ b/drivers/mmc/rpmb.c
> @@ -0,0 +1,323 @@
> +/*
> + * Copyright 2014, Staubli Faverges
> + * Pierre Aubert
> + *
> + * eMMC- Replay Protected Memory Block
> + * According to JEDEC Standard No. 84-A441
> + *
> + * SPDX-License-Identifier:  GPL-2.0+
> + */
> +
> +#include <config.h>
> +#include <common.h>
> +#include <mmc.h>
> +#include <sha256.h>
> +#include "mmc_private.h"
> +
> +/* Request codes */
> +#define RPMB_REQ_KEY         1
> +#define RPMB_REQ_WCOUNTER    2
> +#define RPMB_REQ_WRITE_DATA  3
> +#define RPMB_REQ_READ_DATA   4
> +#define RPMB_REQ_STATUS              5
> +
> +/* Response code */
> +#define RPMB_RESP_KEY                0x0100
> +#define RPMB_RESP_WCOUNTER   0x0200
> +#define RPMB_RESP_WRITE_DATA 0x0300
> +#define RPMB_RESP_READ_DATA  0x0400
> +
> +/* Error codes */
> +#define RPMB_OK                      0
> +#define RPMB_ERR_GENERAL     1
> +#define RPMB_ERR_AUTH        2
> +#define RPMB_ERR_COUNTER     3
> +#define RPMB_ERR_ADDRESS     4
> +#define RPMB_ERR_WRITE               5
> +#define RPMB_ERR_READ                6
> +#define RPMB_ERR_KEY         7
> +#define RPMB_ERR_CNT_EXPIRED 0x80
> +#define RPMB_ERR_MSK         0x7
> +
> +/* Sizes of RPMB data frame */
> +#define RPMB_SZ_STUFF                196
> +#define RPMB_SZ_MAC          32
> +#define RPMB_SZ_DATA         256
> +#define RPMB_SZ_NONCE                16
> +
> +#define SHA256_BLOCK_SIZE    64
> +
> +/* Error messages */
> +static const char * const rpmb_err_msg[] = {
> +     "",
> +     "General failure",
> +     "Authentication failure",
> +     "Counter failure",
> +     "Address failure",
> +     "Write failure",
> +     "Read failure",
> +     "Authentication key not yet programmed",
> +};
> +
> +
> +/* Structure of RPMB data frame. */
> +struct s_rpmb {
> +     unsigned char stuff[RPMB_SZ_STUFF];
> +     unsigned char mac[RPMB_SZ_MAC];
> +     unsigned char data[RPMB_SZ_DATA];
> +     unsigned char nonce[RPMB_SZ_NONCE];
> +     unsigned long write_counter;
> +     unsigned short address;
> +     unsigned short block_count;
> +     unsigned short result;
> +     unsigned short request;
> +};
> +
> +static int mmc_set_blockcount(struct mmc *mmc, unsigned int blockcount,
> +                           bool is_rel_write)
> +{
> +     struct mmc_cmd cmd = {0};
> +
> +     cmd.cmdidx = MMC_CMD_SET_BLOCK_COUNT;
> +     cmd.cmdarg = blockcount & 0x0000FFFF;
> +     if (is_rel_write)
> +             cmd.cmdarg |= 1 << 31;
> +     cmd.resp_type = MMC_RSP_R1;
> +
> +     return mmc_send_cmd(mmc, &cmd, NULL);
> +}
> +static int mmc_rpmb_request(struct mmc *mmc, const struct s_rpmb *s,
> +                         unsigned int count, bool is_rel_write)
> +{
> +     struct mmc_cmd cmd = {0};
> +     struct mmc_data data;
> +     int ret;
> +
> +     ret = mmc_set_blockcount(mmc, count, is_rel_write);
> +     if (ret) {
> +#ifdef CONFIG_MMC_RPMB_TRACE
> +             printf("%s:mmc_set_blockcount-> %d\n", __func__, ret);
> +#endif
> +             return 1;
> +     }
> +
> +     cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK;
> +     cmd.cmdarg = 0;
> +     cmd.resp_type = MMC_RSP_R1b;
> +
> +     data.src = (const char *)s;
> +     data.blocks = 1;
> +     data.blocksize = MMC_MAX_BLOCK_LEN;
> +     data.flags = MMC_DATA_WRITE;
> +
> +     ret = mmc_send_cmd(mmc, &cmd, &data);
> +     if (ret) {
> +#ifdef CONFIG_MMC_RPMB_TRACE
> +             printf("%s:mmc_send_cmd-> %d\n", __func__, ret);
> +#endif
> +             return 1;
> +     }
> +     return 0;
> +}
> +static int mmc_rpmb_response(struct mmc *mmc, struct s_rpmb *s,
> +                          unsigned short expected)
> +{
> +     struct mmc_cmd cmd = {0};
> +     struct mmc_data data;
> +     int ret;
> +
> +     ret = mmc_set_blockcount(mmc, 1, false);
> +     if (ret) {
> +#ifdef CONFIG_MMC_RPMB_TRACE
> +             printf("%s:mmc_set_blockcount-> %d\n", __func__, ret);
> +#endif
> +             return -1;
> +     }
> +     cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
> +     cmd.cmdarg = 0;
> +     cmd.resp_type = MMC_RSP_R1;
> +
> +     data.dest = (char *)s;
> +     data.blocks = 1;
> +     data.blocksize = MMC_MAX_BLOCK_LEN;
> +     data.flags = MMC_DATA_READ;
> +
> +     ret = mmc_send_cmd(mmc, &cmd, &data);
> +     if (ret) {
> +#ifdef CONFIG_MMC_RPMB_TRACE
> +             printf("%s:mmc_send_cmd-> %d\n", __func__, ret);
> +#endif
> +             return -1;
> +     }
> +     /* Check the response and the status */
> +     if (be16_to_cpu(s->request) != expected) {
> +#ifdef CONFIG_MMC_RPMB_TRACE
> +             printf("%s:response= %x\n", __func__,
> +                    be16_to_cpu(s->request));
> +#endif
> +             return -1;
> +     }
> +     ret = be16_to_cpu(s->result);
> +     if (ret) {
> +             printf("%s %s\n", rpmb_err_msg[ret & RPMB_ERR_MSK],
> +                    (ret & RPMB_ERR_CNT_EXPIRED) ?
> +                    "Write counter has expired" : "");
> +     }
> +
> +     /* Return the status of the command */
> +     return ret;
> +}
> +static int mmc_rpmb_status(struct mmc *mmc, unsigned short expected)
> +{
> +     ALLOC_CACHE_ALIGN_BUFFER(struct s_rpmb, rpmb_frame, 1);
> +
> +     memset(rpmb_frame, 0, sizeof(struct s_rpmb));
> +     rpmb_frame->request = cpu_to_be16(RPMB_REQ_STATUS);
> +     if (mmc_rpmb_request(mmc, rpmb_frame, 1, false))
> +             return -1;
> +
> +     /* Read the result */
> +     return mmc_rpmb_response(mmc, rpmb_frame, expected);
> +}
> +static void rpmb_hmac(unsigned char *key, unsigned char *buff, int len,
> +                   unsigned char *output)
> +{
> +     sha256_context ctx;
> +     int i;
> +     unsigned char k_ipad[SHA256_BLOCK_SIZE];
> +     unsigned char k_opad[SHA256_BLOCK_SIZE];
> +
> +     sha256_starts(&ctx);
> +
> +     /* According to RFC 4634, the HMAC transform looks like:
> +        SHA(K XOR opad, SHA(K XOR ipad, text))
> +
> +        where K is an n byte key.
> +        ipad is the byte 0x36 repeated blocksize times
> +        opad is the byte 0x5c repeated blocksize times
> +        and text is the data being protected.
> +     */
> +
> +     for (i = 0; i < RPMB_SZ_MAC; i++) {
> +             k_ipad[i] = key[i] ^ 0x36;
> +             k_opad[i] = key[i] ^ 0x5c;
> +     }
> +     /* remaining pad bytes are '\0' XOR'd with ipad and opad values */
> +     for ( ; i < SHA256_BLOCK_SIZE; i++) {
> +             k_ipad[i] = 0x36;
> +             k_opad[i] = 0x5c;
> +     }
> +     sha256_update(&ctx, k_ipad, SHA256_BLOCK_SIZE);
> +     sha256_update(&ctx, buff, len);
> +     sha256_finish(&ctx, output);
> +
> +     /* Init context for second pass */
> +     sha256_starts(&ctx);
> +
> +     /* start with outer pad */
> +     sha256_update(&ctx, k_opad, SHA256_BLOCK_SIZE);
> +
> +     /* then results of 1st hash */
> +     sha256_update(&ctx, output, RPMB_SZ_MAC);
> +
> +     /* finish up 2nd pass */
> +     sha256_finish(&ctx, output);
> +}
> +int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *pcounter)
> +{
> +     int ret;
> +     ALLOC_CACHE_ALIGN_BUFFER(struct s_rpmb, rpmb_frame, 1);
> +
> +     /* Fill the request */
> +     memset(rpmb_frame, 0, sizeof(struct s_rpmb));
> +     rpmb_frame->request = cpu_to_be16(RPMB_REQ_WCOUNTER);
> +     if (mmc_rpmb_request(mmc, rpmb_frame, 1, false))
> +             return -1;
> +
> +     /* Read the result */
> +     ret = mmc_rpmb_response(mmc, rpmb_frame, RPMB_RESP_WCOUNTER);
> +     if (ret)
> +             return ret;
> +
> +     *pcounter = be32_to_cpu(rpmb_frame->write_counter);
> +     return 0;
> +}
> +int mmc_rpmb_set_key(struct mmc *mmc, void *key)
> +{
> +     ALLOC_CACHE_ALIGN_BUFFER(struct s_rpmb, rpmb_frame, 1);
> +     /* Fill the request */
> +     memset(rpmb_frame, 0, sizeof(struct s_rpmb));
> +     rpmb_frame->request = cpu_to_be16(RPMB_REQ_KEY);
> +     memcpy(rpmb_frame->mac, key, RPMB_SZ_MAC);
> +
> +     if (mmc_rpmb_request(mmc, rpmb_frame, 1, true))
> +             return -1;
> +
> +     /* read the operation status */
> +     return mmc_rpmb_status(mmc, RPMB_RESP_KEY);
> +}
> +int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
> +               unsigned short cnt, unsigned char *key)
> +{
> +     ALLOC_CACHE_ALIGN_BUFFER(struct s_rpmb, rpmb_frame, 1);
> +     int i;
> +
> +     for (i = 0; i < cnt; i++) {
> +             /* Fill the request */
> +             memset(rpmb_frame, 0, sizeof(struct s_rpmb));
> +             rpmb_frame->address = cpu_to_be16(blk + i);
> +             rpmb_frame->request = cpu_to_be16(RPMB_REQ_READ_DATA);
> +             if (mmc_rpmb_request(mmc, rpmb_frame, 1, false))
> +                     break;
> +
> +             /* Read the result */
> +             if (mmc_rpmb_response(mmc, rpmb_frame, RPMB_RESP_READ_DATA))
> +                     break;
> +
> +             /* Check the HMAC if key is provided */
> +             if (key) {
> +                     unsigned char ret_hmac[RPMB_SZ_MAC];
> +
> +                     rpmb_hmac(key, rpmb_frame->data, 284, ret_hmac);
> +                     if (memcmp(ret_hmac, rpmb_frame->mac, RPMB_SZ_MAC)) {
> +                             printf("MAC error on block #%d\n", i);
> +                             break;
> +                     }
> +             }
> +             /* Copy data */
> +             memcpy(addr + i * RPMB_SZ_DATA, rpmb_frame->data, RPMB_SZ_DATA);
> +     }
> +     return i;
> +}
> +int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
> +               unsigned short cnt, unsigned char *key)
> +{
> +     ALLOC_CACHE_ALIGN_BUFFER(struct s_rpmb, rpmb_frame, 1);
> +     unsigned long wcount;
> +     int i;
> +
> +     for (i = 0; i < cnt; i++) {
> +             if (mmc_rpmb_get_counter(mmc, &wcount)) {
> +                     printf("Cannot read RPMB write counter\n");
> +                     break;
> +             }
> +
> +             /* Fill the request */
> +             memset(rpmb_frame, 0, sizeof(struct s_rpmb));
> +             memcpy(rpmb_frame->data, addr + i * RPMB_SZ_DATA, RPMB_SZ_DATA);
> +             rpmb_frame->address = cpu_to_be16(blk + i);
> +             rpmb_frame->block_count = cpu_to_be16(1);
> +             rpmb_frame->write_counter = cpu_to_be32(wcount);
> +             rpmb_frame->request = cpu_to_be16(RPMB_REQ_WRITE_DATA);
> +             /* Computes HMAC */
> +             rpmb_hmac(key, rpmb_frame->data, 284, rpmb_frame->mac);
> +
> +             if (mmc_rpmb_request(mmc, rpmb_frame, 1, true))
> +                     break;
> +
> +             /* Get status */
> +             if (mmc_rpmb_status(mmc, RPMB_RESP_WRITE_DATA))
> +                     break;
> +     }
> +     return i;
> +}
> diff --git a/include/mmc.h b/include/mmc.h
> index 42d0125..14d296c 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -69,6 +69,7 @@
> #define MMC_CMD_SET_BLOCKLEN          16
> #define MMC_CMD_READ_SINGLE_BLOCK     17
> #define MMC_CMD_READ_MULTIPLE_BLOCK   18
> +#define MMC_CMD_SET_BLOCK_COUNT         23
> #define MMC_CMD_WRITE_SINGLE_BLOCK    24
> #define MMC_CMD_WRITE_MULTIPLE_BLOCK  25
> #define MMC_CMD_ERASE_GROUP_START     35
> @@ -224,6 +225,7 @@
>  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
>  */
> #define MMC_NUM_BOOT_PARTITION        2
> +#define MMC_PART_RPMB           3       /* RPMB partition number */
> 
> struct mmc_cid {
>       unsigned long psn;
> @@ -335,7 +337,13 @@ int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 
> part_num, u8 access);
> int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
> /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
> int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
> -
> +/* Functions to read / write the RPMB partition */
> +int mmc_rpmb_set_key(struct mmc *mmc, void *key);
> +int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
> +int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
> +               unsigned short cnt, unsigned char *key);
> +int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
> +                unsigned short cnt, unsigned char *key);
> /**
>  * Start device initialization and return immediately; it does not block on
>  * polling OCR (operation condition register) status.  Then you should call
> diff --git a/lib/Makefile b/lib/Makefile
> index 27e4f78..377ab13 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -35,6 +35,7 @@ obj-y += net_utils.o
> obj-$(CONFIG_PHYSMEM) += physmem.o
> obj-y += qsort.o
> obj-$(CONFIG_SHA1) += sha1.o
> +obj-$(CONFIG_SUPPORT_EMMC_RPMB) += sha256.o
> obj-$(CONFIG_SHA256) += sha256.o
> obj-y += strmhz.o
> obj-$(CONFIG_TPM) += tpm.o
> -- 
> 1.7.6.5
> 

Looks good.

Applied

Thanks

-- Pantelis

Acked-by: Pantelis Antoniou <pa...@antoniou-consulting.com>

> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to