Hi Tim,
On 08/05/14 08:16, Tim Harvey wrote:
Add memory-mapped structures for MMDC iomux and configuration. Note that
the MMDC configuration registers are common between the IMX6DQ
(IMX6DUAL/IMX6QUAD) and IMX6SDL (IMX6SOLO/IMX6DUALLITE) the iomux
register addresses differ. This requires two sets of structures.
Add structures to describe DDR3 device information, system information
(memory layout, etc), and MMDC calibration regitsers that can be used to
configure the MMDC dynamically.
s/regitsers/registers
We define these structures for SPL builds instead of including mx6q-ddr.h an
mx6dl-ddr.h which use the same namespace and are only useful for imximage cf
files.
What about the usefulness of the structs for U-Boot code? For example,
it might be necessary for U-Boot code to query the MMDC registers to
setup memory related variables like gd->ram_size and
gd->bd->bi_dram[i].size. Sure this can be done using the #defines
in the header files, but we lose nothing by making the structs
available to U-Boot as well.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
