pass correct PHY Address when running on SK so that we have working ethernet with this board too.
Signed-off-by: Felipe Balbi <[email protected]> --- board/ti/am43xx/board.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 6379cef..054a452 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -594,6 +594,11 @@ int board_eth_init(bd_t *bis) writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII; cpsw_slaves[0].phy_addr = 16; + } else if (board_is_sk()) { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII; + cpsw_slaves[0].phy_addr = 4; + cpsw_slaves[1].phy_addr = 5; } else { writel(RGMII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII; -- 2.0.0.rc1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
