Dear Minkyu,
On 06/27/2014 11:40 AM, Minkyu Kang wrote:
Dear Przemyslaw Marczak,
On 26/06/14 23:15, Przemyslaw Marczak wrote:
It is possible to boot from a few media devices, especially
using a micro SD or eMMC slots. In this situation depends on
a boot device - some setup can be changeg.
This change adds function:
boot_device() - which returns an OM[1:5] bits value
This allows checking if boot device is SD(0x2).
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
Changes v3:
- new commit after separate one into two
---
board/samsung/common/board.c | 10 +++++++++-
include/samsung/misc.h | 7 +++++++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 9dc7c83..ecf3f76 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -41,6 +41,13 @@ int __exynos_power_init(void)
int exynos_power_init(void)
__attribute__((weak, alias("__exynos_power_init")));
+unsigned int boot_device(void)
+{
+ unsigned int om_stat = samsung_get_base_power();
+
+ return BOOT_DEVICE(readl(om_stat));
+}
+
#if defined CONFIG_EXYNOS_TMU
/* Boot Time Thermal Analysis for SoC temperature threshold breach */
static void boot_temp_check(void)
@@ -243,19 +250,20 @@ int board_eth_init(bd_t *bis)
int board_mmc_init(bd_t *bis)
{
int ret;
+
#ifdef CONFIG_DWMMC
/* dwmmc initializattion for available channels */
ret = exynos_dwmmc_init(gd->fdt_blob);
if (ret)
debug("dwmmc init failed\n");
#endif
-
#ifdef CONFIG_SDHCI
/* mmc initializattion for available channels */
ret = exynos_mmc_init(gd->fdt_blob);
if (ret)
debug("mmc init failed\n");
#endif
+
return ret;
}
#endif
diff --git a/include/samsung/misc.h b/include/samsung/misc.h
index 10653a1..57bac7d 100644
--- a/include/samsung/misc.h
+++ b/include/samsung/misc.h
@@ -28,4 +28,11 @@ void check_boot_mode(void);
void draw_logo(void);
#endif
+#define BOOT_DEVICE_SDMMC 0x2
+#define BOOT_DEVICE_MASK 0x1f
+#define BOOT_DEVICE_SHIFT 0x1
+#define BOOT_DEVICE(x) (((x) >> BOOT_DEVICE_SHIFT) & BOOT_DEVICE_MASK)
+
+unsigned int boot_device(void);
Hm, do we need to make this function to non-static?
If so, it should be placed in power.c - get_om_stat()?
Thanks,
Minkyu Kang.
It is non-static because it is called also outside this file, so I will
move it to power.c.
Thank you,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
