The base address of I2C2 is 0x118100 instead of 0x119000. Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> --- include/configs/T1040QDS.h | 2 +- include/configs/T104xRDB.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 2215ac8..5b75562 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -443,7 +443,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 #define I2C_MUX_PCA_ADDR 0x77 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index e564cb7..e265786 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -441,7 +441,7 @@ #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -- 1.8.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
