If hwconfig does not contains "en_cpc" then by default all cpcs are enabled If this config is defined then only those individual cpcs which are defined in the subargument of "en_cpc" will be enabled e.g en_cpc:cpc1,cpc2; (this will enable cpc1 and cpc2) or en_cpc:cpc2; (this enables just cpc2)
Signed-off-by: Shaveta Leekha <[email protected]> Signed-off-by: Sandeep Singh <[email protected]> --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 27 +++++++++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 78316a6..ecde00b 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -254,11 +254,38 @@ static void enable_tdm_law(void) static void enable_cpc(void) { int i; + int ret; u32 size = 0; cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; + char buffer[HWCONFIG_BUFFER_SIZE]; + char cpc_subarg[16]; + bool have_hwconfig = false; + int cpc_args = 0; + + /* + * Extract hwconfig from environment since environmen + * is not setup properly yet + */ + ret = getenv_f("hwconfig", buffer, sizeof(buffer)); + if (ret > 0) { + /* + * If "en_cpc" is not defined in hwconfig then by default all + * cpcs are enable. If this config is defined then individual + * cpcs which have to be enabled should also be defined. + * e.g en_cpc:cpc1,cpc2; + */ + if (hwconfig_f("en_cpc", buffer)) + have_hwconfig = true; + } for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { + if (have_hwconfig) { + sprintf(cpc_subarg, "cpc%u", i + 1); + cpc_args = hwconfig_sub_f("en_cpc", cpc_subarg, buffer); + if (cpc_args == 0) + continue; + } u32 cpccfg0 = in_be32(&cpc->cpccfg0); size += CPC_CFG0_SZ_K(cpccfg0); -- 1.7.6.GIT _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
