Hi Prafulla, On Fri, 4 Jul 2014 11:43:48 -0700, Prafulla Wadaskar <prafu...@marvell.com> wrote:
> > > > -----Original Message----- > > From: Luka Perkov [mailto:l...@openwrt.org] > > Sent: 02 July 2014 05:48 > > To: u-boot@lists.denx.de > > Cc: l...@openwrt.org; Prafulla Wadaskar; Stefan Roese > > Subject: [PATCH] ARM: kirkwood: fix cpu info for 6282 > > device id > > > > Signed-off-by: Luka Perkov <l...@openwrt.org> > > CC: Prafulla Wadaskar <prafu...@marvell.com> > > CC: Stefan Roese <s...@denx.de> > > --- > > arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 11 ++++++++--- > > 1 file changed, 8 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c > > b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c > > index da80240..312d2b2 100644 > > --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c > > +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c > > @@ -252,7 +252,7 @@ static void kw_sysrst_check(void) > > #if defined(CONFIG_DISPLAY_CPUINFO) > > int print_cpuinfo(void) > > { > > - char *rev; > > + char *rev = "??"; > > u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & > > 0xffff; > > u8 revid = readl(KW_REG_PCIE_REVID) & 0xff; > > > > @@ -263,7 +263,13 @@ int print_cpuinfo(void) > > > > switch (revid) { > > case 0: > > - rev = "Z0"; > > + if (devid == 0x6281) > > + rev = "Z0"; > > + else if (devid == 0x6282) > > + rev = "A0"; > > + break; > > + case 1: > > + rev = "A1"; > > break; > > case 2: > > rev = "A0"; > > @@ -272,7 +278,6 @@ int print_cpuinfo(void) > > rev = "A1"; > > break; > > default: > > - rev = "??"; > > break; > > } > > > > Acked-By: Prafulla Wadaskar <prafu...@marvell.com> > > Will be pulled latter. Prafulla, just a note in case you intend to send a PR for 2014.07: I'll be unavailable for U-Boot work from Monday july 7th to Tuesday july 22nd inclusive, so meanwhile, a Marvell PR for 2014.07 would have to be sent to Tom Rini. > Regards... > Prafulla . . . Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
