Hi Shengzhou Liu, On Fri, Jul 18, 2014 at 4:33 PM, York Sun <[email protected]> wrote: > > On 05/19/2014 01:29 AM, Shengzhou Liu wrote: > > Add support for Cortina CS4315/CS4340 10G PHY. > > - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device > > to initialize Cortina PHY. > > - Cortina PHY has non-standard offset of PHY ID registers, thus > > we define own get_phy_id() to override default get_phy_id(). > > - To define macro CONFIG_PHY_CORTINA will enable this driver. > > > > Signed-off-by: Shengzhou Liu <[email protected]> > > --- > > v5: fix unclaimed variable in case of nand boot. > > v4: add support for loading cortina phy ucode from NAND/SPI/SD > > v3: move devad as '0' in cortina.c instead of in phy.c > > v2: no change. > > > Joe, > > Would you take this patch, or ack it so I can take it in? > > http://patchwork.ozlabs.org/patch/350162/
NAK Please add your new phy to phy.c and phy.h in alphabetical order like the rest of them. Thanks, -Joe
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
