The Gateworks System Controller EEPROM config is flash based. Add a delay
following writes to avoid errors on back-to-back writes.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
board/gateworks/gw_ventana/gsc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c
index 37966ab..1cf38d4 100644
--- a/board/gateworks/gw_ventana/gsc.c
+++ b/board/gateworks/gw_ventana/gsc.c
@@ -57,7 +57,7 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar
*buf, int len)
break;
mdelay(10);
}
- mdelay(1);
+ mdelay(100);
return ret;
}
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
