On 08/13/2014 11:45 PM, Alison Wang wrote: > On LS1021ATWR, Silicon's Sii9022A HDMI Transmitter > is used. This patch adds the common setting for this > chip. > > Signed-off-by: Alison Wang <alison.w...@freescale.com> > --- > Change log: > v4: Add commit messages. > v3: New file. > > board/freescale/common/Makefile | 2 + > board/freescale/common/dcu_sii9022a.c | 153 > ++++++++++++++++++++++++++++++++++ > board/freescale/common/dcu_sii9022a.h | 13 +++ > 3 files changed, 168 insertions(+) > create mode 100644 board/freescale/common/dcu_sii9022a.c > create mode 100644 board/freescale/common/dcu_sii9022a.h
Shouldn't this driver stay under driver/video? It is for the HDMI transmitter, not Freescale board specific, is it? > > diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile > index 22b57cc..808ddd0 100644 > --- a/board/freescale/common/Makefile > +++ b/board/freescale/common/Makefile > @@ -34,6 +34,8 @@ ifndef CONFIG_RAMBOOT_PBL > obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o > endif > > +obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o > + > obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o > obj-$(CONFIG_MPC8548CDS) += cds_pci_ft.o > obj-$(CONFIG_MPC8555CDS) += cds_pci_ft.o > diff --git a/board/freescale/common/dcu_sii9022a.c > b/board/freescale/common/dcu_sii9022a.c > new file mode 100644 > index 0000000..2da627e > --- /dev/null > +++ b/board/freescale/common/dcu_sii9022a.c > @@ -0,0 +1,153 @@ > +/* > + * Copyright 2014 Freescale Semiconductor, Inc. > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <asm/io.h> > +#include <common.h> > +#include <fsl_dcu_fb.h> > I think you put the patches in wrong order. DCU driver has not been added before this patch. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
