Add macro which defines i2c_pads_info structs for multiple SoC types,
and a macro which selects the appropriate struct based on CPU type,
thus eliminating the need to manage multiple i2c pad configurations
manually when supporting multiple SoC types.
Cc: Stefano Babic <sba...@denx.de>
Cc: Tim Harvey <thar...@gateworks.com>
Acked-by: Tim Harvey <thar...@gateworks.com>
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
---
Changes in V4:
- No changes.
Changes in V3:
- No changes.
Changes in V2:
- No changes.
arch/arm/include/asm/imx-common/mxc_i2c.h | 33 +++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h
b/arch/arm/include/asm/imx-common/mxc_i2c.h
index 47a9edc..182c2f3 100644
--- a/arch/arm/include/asm/imx-common/mxc_i2c.h
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -19,6 +19,39 @@ struct i2c_pads_info {
struct i2c_pin_ctrl sda;
};
+#if defined(CONFIG_MX6QDL)
+#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
+ struct i2c_pads_info mx6q_##name = { \
+ .scl = { \
+ .i2c_mode = MX6Q_##scl_i2c, \
+ .gpio_mode = MX6Q_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6Q_##sda_i2c, \
+ .gpio_mode = MX6Q_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ }; \
+ struct i2c_pads_info mx6s_##name = { \
+ .scl = { \
+ .i2c_mode = MX6DL_##scl_i2c, \
+ .gpio_mode = MX6DL_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6DL_##sda_i2c, \
+ .gpio_mode = MX6DL_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ };
+
+
+#define I2C_PADS_INFO(name) \
+ (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
+ &mx6q_##name : &mx6s_##name
+#endif
+
void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
struct i2c_pads_info *p);
void bus_i2c_init(void *base, int speed, int slave_addr,
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
