On 08/18/2014 01:16 AM, Thierry Reding wrote:
From: Thierry Reding <[email protected]>
The Jetson TK1 has an ethernet NIC connected to the PCIe bus and routes
the second root port to a miniPCIe slot. Enable the PCIe controller and
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts
b/arch/arm/dts/tegra124-jetson-tk1.dts
+ regulators {
+ /* Molex power connector */
+ vdd_5v0_sata: regulator@13 {
...
+ vdd_12v0_sata: regulator@14 {
Those two aren't in the kernel DT yet. I'll assume they match what's
been proposed for the SATA patches:-)
diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c
b/board/nvidia/jetson-tk1/jetson-tk1.c
A lot of the AS3722 code here duplicates what's in
board/nvidia/venice2/as3722_init.[ch]. It'd be good to put it all in one
place. Personally I'd be OK with putting it into the existing Venice2
code, but I suppose as Simon mentioned, a "real" AS3722 driver in
drivers/power/pmic would be a good idea.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
