On 08/28/2014 01:02 PM, Peter Crosthwaite wrote:
> Ping!
>
> On Wed, Aug 20, 2014 at 10:14 PM, Peter Crosthwaite
> <crosthwaitepe...@gmail.com> wrote:
>> To better enable debug of u-boot itself (in particular SPL). To debug
>> u-boot you want to put your board in JTAG boot mode for quick recompile
>> and elf downloads via the JTAG debugger. Yet you may still want to boot
>> from a persistent storage media (SD or QSPI). Allow override of the
>> boot mode pins to facilitate this.
>>
>> Signed-off-by: Peter Crosthwaite <crosthwaite.pe...@gmail.com>
>> ---
>> arch/arm/cpu/armv7/zynq/slcr.c | 4 ++++
>> doc/README.zynq | 6 ++++++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
>> index 934ccc3..26e02b8 100644
>> --- a/arch/arm/cpu/armv7/zynq/slcr.c
>> +++ b/arch/arm/cpu/armv7/zynq/slcr.c
>> @@ -155,8 +155,12 @@ void zynq_slcr_devcfg_enable(void)
>>
>> u32 zynq_slcr_get_boot_mode(void)
>> {
>> +#ifdef CONFIG_ZYNQ_BM_FORCE
>> + return CONFIG_ZYNQ_BM_FORCE;
>> +#else
>> /* Get the bootmode register value */
>> return readl(&slcr_base->boot_mode);
>> +#endif
>> }
>>
>> u32 zynq_slcr_get_idcode(void)
>> diff --git a/doc/README.zynq b/doc/README.zynq
>> index 043c970..70be7ae 100644
>> --- a/doc/README.zynq
>> +++ b/doc/README.zynq
>> @@ -52,6 +52,12 @@ board_late_init() will read the bootmode values using
>> slcr bootmode register
>> at runtime and assign the modeboot variable to specific bootmode string
>> which
>> is intern used in autoboot.
>>
>> +This value can be overridden at compile time with the define
>> +CONFIG_ZYNQ_BM_FORCE. This is useful for debugging a u-boot elf downloaded
>> +over JTAG. E.g. The board will be jumpered for ZYNQ_BM_JTAG, but you can
>> +force u-boot to attempt an SD or QSPI boot should that be what you want to
>> +debug.
>> +I understand the purpose of this patch but I don't think it is useful to add and support this option. Someone else could come with reading GPIO for this purpose, etc which is just the same case. I am happy to add the patch which shows bootmode register content or any ? : logic around in debug() print but adding new CONFIG_ option is just too much. (Also every new config option should be properly documented). The second option is to setup spl_boot_device in arch zynq as weak function and overwrite it. Then you can setup whatever you like in your board file. Thanks, Michal
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
