On 21/08/2014 08:37, Tim Harvey wrote: > On Thu, Aug 7, 2014 at 10:49 PM, Tim Harvey <thar...@gateworks.com> wrote: >> Many of the Gateworks Ventana boards have a PLX PCIe switch where GPIO >> on the switch is used as the PERST# of the downstream ports. In the Linux >> kernel there is a PCI fixup that asserts these properly when the upstream >> port is enumerated. >> >> The first patch in this serial adds a board_pci_fixup_dev function define >> to allow hooking similarly to the kernel pci fixup functionality. >> >> The second patch uses the board_pci_fixup_dev function to perform the >> GPIO configuration on the switch for the downstream ports. >> >> Tim Harvey (2): >> pci: add support for board_pci_fixup_dev function >> imx: ventana: add pci fixup for PLX PEX860x switch GPIO >> >> board/gateworks/gw_ventana/gw_ventana.c | 30 ++++++++++++++++++++++++++++++ >> drivers/pci/pci.c | 4 ++++ >> include/configs/gw_ventana.h | 1 + >> include/pci.h | 7 +++++++ >> 4 files changed, 42 insertions(+) >> >> -- >> 1.8.3.2 >> > > Any comments on these? I'm wondering if there is someone else I should > be including with regards to reviewing pci changes. >
No comment, and I do not see any bad influence on other boards - I am going to apply them. Regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot