From: Fabio Estevam <[email protected]> i2c_pad_info1 is only used locally, so it can be made static.
Fix the following sparse warning: board/freescale/mx6sxsabresd/mx6sxsabresd.c:160:22: warning: symbol 'i2c_pad_info1' was not declared. Should it be static? Signed-off-by: Fabio Estevam <[email protected]> --- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 5eaec1b..68d3718 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis) #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
