Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example.
Signed-off-by: Simon Glass <[email protected]> --- board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++ include/configs/cm_fx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 80a123d..41222cb 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -9,11 +9,13 @@ */ #include <common.h> +#include <dm.h> #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> #include <fdt_support.h> #include <sata.h> +#include <serial_mxc.h> #include <asm/arch/crm_regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/iomux.h> @@ -490,3 +492,11 @@ u32 get_board_rev(void) return cl_eeprom_get_board_rev(); } +struct mxc_serial_platdata serial_mxc_plat = { + .reg = (struct mxc_uart *)UART4_BASE, +}; + +U_BOOT_DEVICE(mxc_serial) = { + .name = "serial_mxc", + .platdata = &serial_mxc_plat, +}; diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4..1f55150 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,6 +21,17 @@ #define CONFIG_MACH_TYPE 4273 #define CONFIG_SYS_HZ 1000 +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM +#define CONFIG_CMD_DM + +#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO + +#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* Display information on boot */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -- 2.1.0.rc2.206.gedb03e5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
