The inlining is done by GCC when needed, there is no need to do it
explicitly. Furthermore, the inline keyword does not force-inline
the code, but is only a hint for the compiler. Scrub this hint.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Chin Liang See <cl...@altera.com>
Cc: Dinh Nguyen <dingu...@altera.com>
Cc: Albert Aribaud <albert.u.b...@aribaud.net>
Cc: Tom Rini <tr...@ti.com>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Pavel Machek <pa...@denx.de>
Acked-by: Dinh Nguyen <dingu...@opensource.altera.com>
---
arch/arm/cpu/armv7/socfpga/clock_manager.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/cpu/armv7/socfpga/clock_manager.c
b/arch/arm/cpu/armv7/socfpga/clock_manager.c
index 158501a..d032bbd 100644
--- a/arch/arm/cpu/armv7/socfpga/clock_manager.c
+++ b/arch/arm/cpu/armv7/socfpga/clock_manager.c
@@ -30,7 +30,7 @@ static const struct socfpga_clock_manager *clock_manager_base
=
CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \
CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
-static inline void cm_wait_for_lock(uint32_t mask)
+static void cm_wait_for_lock(uint32_t mask)
{
register uint32_t inter_val;
do {
@@ -39,7 +39,7 @@ static inline void cm_wait_for_lock(uint32_t mask)
}
/* function to poll in the fsm busy bit */
-static inline void cm_wait_for_fsm(void)
+static void cm_wait_for_fsm(void)
{
while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
;
@@ -49,22 +49,22 @@ static inline void cm_wait_for_fsm(void)
* function to write the bypass register which requires a poll of the
* busy bit
*/
-static inline void cm_write_bypass(uint32_t val)
+static void cm_write_bypass(uint32_t val)
{
writel(val, &clock_manager_base->bypass);
cm_wait_for_fsm();
}
/* function to write the ctrl register which requires a poll of the busy bit */
-static inline void cm_write_ctrl(uint32_t val)
+static void cm_write_ctrl(uint32_t val)
{
writel(val, &clock_manager_base->ctrl);
cm_wait_for_fsm();
}
/* function to write a clock register that has phase information */
-static inline void cm_write_with_phase(uint32_t value,
- uint32_t reg_address, uint32_t mask)
+static void cm_write_with_phase(uint32_t value,
+ uint32_t reg_address, uint32_t mask)
{
/* poll until phase is zero */
while (readl(reg_address) & mask)
--
2.0.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
