Hi Andreas, On Fri, 19 Sep 2014 08:32:28 +0200, Andreas Bießmann <andreas.de...@googlemail.com> wrote:
> Dear Albert Aribaud, > > please pull the following changes into u-boot-arm/master. > > The following changes since commit 9170818a4e004af7893fa0113f6e5b4afafded55: > > kconfiglib: change SPDX-License-Identifier to ISC (2014-09-17 21:03:18 > -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to 015b18c642d9b0f92d1b35f6d6ed73a6a0b29675: > > ARM: at91sam9rlek: convert to generic board support (2014-09-19 00:11:24 > +0200) > > ---------------------------------------------------------------- > Bo Shen (7): > ARM: atmel: sama5d3xek: add nor flash init function > ARM: atmel: sama5d3xek: enable NOR flash support > ARM: atmel: sama5d3: add timings register > ARM: atmel: use pcr to enable or disable peripheral clock > ARM: atmel: add pcr related definition > USB: ohci-at91: use pcr to enable or disable clock > USB: ehci-atmel: use pcr to enable or disable clock > > Boris BREZILLON (1): > mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC > > Wu, Josh (3): > mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc > register > ARM: at91sam9n12ek: convert to generic board support > ARM: at91sam9rlek: convert to generic board support > > arch/arm/cpu/armv7/at91/clock.c | 24 +++++++++-- > arch/arm/include/asm/arch-at91/at91_pmc.h | 6 ++- > arch/arm/include/asm/arch-at91/clk.h | 1 + > arch/arm/include/asm/arch-at91/sama5d3.h | 1 + > arch/arm/include/asm/arch-at91/sama5d3_smc.h | 3 +- > board/atmel/sama5d3xek/sama5d3xek.c | 58 > ++++++++++++++++++++++++++ > drivers/mtd/nand/atmel_nand.c | 22 +++++----- > drivers/mtd/nand/atmel_nand_ecc.h | 3 ++ > drivers/usb/host/ehci-atmel.c | 8 ++++ > drivers/usb/host/ohci-at91.c | 8 ++-- > include/configs/at91sam9n12ek.h | 1 + > include/configs/at91sam9rlek.h | 2 + > include/configs/sama5d3xek.h | 13 +++++- > 13 files changed, 129 insertions(+), 21 deletions(-) Applied to u-boot-arm/master, thanks! (7 boards fail to build after like before this PR, namely openrd_client tricorder_flash tricorder cm_fx6 openrd_ultimate trimslice openrd_base, all of which are accounted for) Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot