IFC registers can be of type Little Endian or big Endian depending upon
Freescale SoC. Here SoC defines the register type of IFC IP.
So use IFC acessor functions instead of in_be32().
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 6 +++---
arch/powerpc/cpu/mpc85xx/speed.c | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 47b712d..1f00e3c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -70,9 +70,9 @@ void setup_ifc(void)
#endif
/* Change flash's physical address */
- out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
- out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
- out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
+ ifc_out32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
+ ifc_out32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
+ ifc_out32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
return ;
}
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 3236f6a..8426b1a 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -430,7 +430,7 @@ void get_sys_info(sys_info_t *sys_info)
#endif
#if defined(CONFIG_FSL_IFC)
- ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ifc_in32(&ifc_regs->ifc_ccr);
ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
sys_info->freq_localbus = sys_info->freq_systembus / ccr;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
