ls1021 is arm-core and support qe which is u-qe.
add u-qe init for arm board.
Signed-off-by: Zhao Qiang <b45...@freescale.com>
---
arch/arm/include/asm/arch-ls102xa/config.h | 4 ++++
arch/arm/include/asm/global_data.h | 8 ++++++++
drivers/Makefile | 1 +
drivers/qe/Makefile | 3 ++-
drivers/qe/fdt.c | 2 ++
drivers/qe/qe.c | 13 +++++++++++++
drivers/qe/qe.h | 1 +
7 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h
b/arch/arm/include/asm/arch-ls102xa/config.h
index ed78c33..526ceb4 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -65,6 +65,10 @@
#define DCU_LAYER_MAX_NUM 16
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
+
#define CONFIG_SYS_FSL_SRDS_1
#ifdef CONFIG_LS102XA
diff --git a/arch/arm/include/asm/global_data.h
b/arch/arm/include/asm/global_data.h
index 63e4ad5..900f127 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -17,6 +17,14 @@ struct arch_global_data {
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
+
+#if defined(CONFIG_U_QE)
+ u32 qe_clk;
+ u32 brg_clk;
+ uint mp_alloc_base;
+ uint mp_alloc_top;
+#endif /* CONFIG_U_QE */
+
#ifdef CONFIG_AT91FAMILY
/* "static data" needed by at91's clock.c */
unsigned long cpu_clk_rate_hz;
diff --git a/drivers/Makefile b/drivers/Makefile
index b23076f..f4ae477 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -14,4 +14,5 @@ obj-y += twserial/
obj-y += video/
obj-y += watchdog/
obj-$(CONFIG_QE) += qe/
+obj-$(CONFIG_U_QE) += qe/
obj-y += memory/
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index 7f1bd06..8fa4866 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -4,5 +4,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := qe.o uccf.o uec.o uec_phy.o
+obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
+obj-$(CONFIG_U_QE) += qe.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index d9a7d82..dfae4bf 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -12,6 +12,7 @@
#include <fdt_support.h>
#include "qe.h"
+#ifdef CONFIG_QE
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -72,3 +73,4 @@ void ft_qe_setup(void *blob)
"clock-frequency", gd->arch.qe_clk / 2, 1);
fdt_fixup_qe_firmware(blob);
}
+#endif
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index be09a17..075fd48 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
return;
}
+#ifdef CONFIG_QE
uint qe_muram_alloc(uint size, uint align)
{
uint retloc;
@@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align)
return retloc;
}
+#endif
void *qe_muram_addr(uint offset)
{
@@ -180,6 +182,15 @@ void qe_init(uint qe_base)
qe_snums_init();
}
+void u_qe_init(void)
+{
+ uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
+ qe_immr = (qe_map_t *)qe_base;
+
+ qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
+ out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+}
+
void qe_reset(void)
{
qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
@@ -212,6 +223,7 @@ void qe_assign_page(uint snum, uint para_ram_base)
#define BRG_CLK (gd->arch.brg_clk)
+#ifdef CONFIG_QE
int qe_set_brg(uint brg, uint rate)
{
volatile uint *bp;
@@ -239,6 +251,7 @@ int qe_set_brg(uint brg, uint rate)
return 0;
}
+#endif
/* Set ethernet MII clock master
*/
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index ebb7c5f..30484b8 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -275,6 +275,7 @@ void *qe_muram_addr(uint offset);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
void qe_init(uint qe_base);
+void u_qe_init(void);
void qe_reset(void);
void qe_assign_page(uint snum, uint para_ram_base);
int qe_set_brg(uint brg, uint rate);
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
