On Wed, 2014-09-24 at 16:01 +0800, Chen-Yu Tsai wrote:
> From: Hans de Goede <hdego...@redhat.com>
> 
> The mmc hardware on sun6i has an extra reset control that needs to
> be de-asserted prior to usage. Also the FIFO address is different.
> 
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> [w...@csie.org: use setbits_le32 for reset control, drop obsolete changes,
>               rewrite different FIFO address handling, add commit message]
> Signed-off-by: Chen-Yu Tsai <w...@csie.org>

Acked-by: Ian Campbell <i...@hellion.org.uk>

Pantelis, unless you object I'd like to eventually take this into
u-boot-sunxi.git#next and merge for v2015.04.

> ---
>  arch/arm/include/asm/arch-sunxi/mmc.h |  5 ++++-
>  drivers/mmc/sunxi_mmc.c               | 11 +++++++----
>  2 files changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h 
> b/arch/arm/include/asm/arch-sunxi/mmc.h
> index 53196e3..6a31184 100644
> --- a/arch/arm/include/asm/arch-sunxi/mmc.h
> +++ b/arch/arm/include/asm/arch-sunxi/mmc.h
> @@ -43,7 +43,10 @@ struct sunxi_mmc {
>       u32 chda;               /* 0x90 */
>       u32 cbda;               /* 0x94 */
>       u32 res1[26];
> -     u32 fifo;               /* 0x100 FIFO access address */
> +#if defined(CONFIG_SUN6I)
> +     u32 res2[64];
> +#endif
> +     u32 fifo;               /* 0x100 (0x200 on sun6i) FIFO access address */
>  };
>  
>  #define SUNXI_MMC_CLK_POWERSAVE              (0x1 << 17)
> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> index d4e574f..1982988 100644
> --- a/drivers/mmc/sunxi_mmc.c
> +++ b/drivers/mmc/sunxi_mmc.c
> @@ -19,7 +19,6 @@
>  struct sunxi_mmc_host {
>       unsigned mmc_no;
>       uint32_t *mclkreg;
> -     unsigned database;
>       unsigned fatal_err;
>       unsigned mod_clk;
>       struct sunxi_mmc *reg;
> @@ -57,7 +56,6 @@ static int mmc_resource_init(int sdc_no)
>               printf("Wrong mmc number %d\n", sdc_no);
>               return -1;
>       }
> -     mmchost->database = (unsigned int)mmchost->reg + 0x100;
>       mmchost->mmc_no = sdc_no;
>  
>       return 0;
> @@ -75,6 +73,11 @@ static int mmc_clk_io_on(int sdc_no)
>       /* config ahb clock */
>       setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
>  
> +#if defined(CONFIG_SUN6I)
> +     /* unassert reset */
> +     setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
> +#endif
> +
>       /* config mod clock */
>       pll_clk = clock_get_pll6();
>       /* should be close to 100 MHz but no more, so round up */
> @@ -194,9 +197,9 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct 
> mmc_data *data)
>               }
>  
>               if (reading)
> -                     buff[i] = readl(mmchost->database);
> +                     buff[i] = readl(&mmchost->reg->fifo);
>               else
> -                     writel(buff[i], mmchost->database);
> +                     writel(buff[i], &mmchost->reg->fifo);
>       }
>  
>       return 0;


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to