2014-10-03 19:21 GMT+09:00 Masahiro Yamada <yamad...@jp.panasonic.com>: > The SPL-mode driver for Denali(Cadence) NAND Flash Memory Controller IP. > > This driver requires two CONFIG macros: > - CONFIG_SPL_NAND_DENALI > Define to enable this driver. > - CONFIG_SYS_NAND_BAD_BLOCK_POS > Specify bad block mark position in the oob space. Typically 0. > > Signed-off-by: Masahiro Yamada <yamad...@jp.panasonic.com> > Cc: Chin Liang See <cl...@altera.com> > Cc: Scott Wood <scottw...@freescale.com> > --- > > Changes in v6: None > Changes in v5: > - Remove the workaround added by v4 > because the denali.h was merget into the mainline > - Add Kconfig entry > - Add comments where we read out some register values > > Changes in v4: > - Add a workaround to not depend on the Denali driver > posted by Chin Liang See. > This driver has been taking too long: > http://patchwork.ozlabs.org/patch/381305/ > > Changes in v3: None > Changes in v2: > - Avoid unaligned access > - Replace a magic number 0x2000 with PIPELINE_ACCESS >
Applied to u-boot-uniphier/master. -- Best Regards Masahiro Yamada _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
