that's weird, because i don't have bootz: U-Boot 2014.10-rc3 (Oct 08 2014 - 11:34:33) for ARNDALE
CPU: Exynos5250@1000MHz Board: Arndale I2C: i2c_init: failed to init bus 0 for speed = 100000 ready DRAM: 2 GiB trace: copying 00086db4 bytes of early data from 50000000 to beff0000 trace: enabled WARNING: Caches not enabled MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 dwmci_send_cmd: DATA ERROR! i2c_init: failed to init bus 0 for speed = 100000 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 ARNDALE # help bootz Unknown command 'bootz' - try 'help' without arguments for list of all known commands ARNDALE # are you using a patched u-boot? i'm using the default arndale_defconfig. anyhow, can i have your full working config? i'm starting to feel i'm chasing ghosts here. On Wed, Oct 8, 2014 at 10:00 AM, Guillaume Gardet <[email protected]> wrote: > I used the following values with 2014.10-rc2: > kerneladdr=0x44000000 > ramdiskaddr=0x45000000 > fdtaddr=0x4c000000 > > But I used a zImage. If you use a uImage, you need to modify the kernel load > addr. > > Guillaume > > > Le 07/10/2014 17:02, Paolo Pisati a écrit : > >> those are the addresses suggested by u-boot and yes, i already tried >> moving stuff around but it didn't fix it: what's the working config >> with your board? u-boot version? >> >> On Tue, Oct 7, 2014 at 4:34 PM, Guillaume Gardet >> <[email protected]> wrote: >>> >>> Hi, >>> >>> Le 07/10/2014 14:58, Paolo Pisati a écrit : >>> >>>> Hi, >>>> >>>> i've been trying to update the u-boot on my board (sd booting), from the >>>> Linaro >>>> one (2012.10) to a v2014.X, but so far had no luck: >>>> >>>> make arndale_config >>>> export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- >>>> make >>>> >>>> ... >>>> >>>> dd if=arndale-bl1.bin of=/dev/sdc bs=512 skip=1 >>>> dd if=arndale-spl.bin of=/dev/sdc bs=512 skip=17 >>>> dd if=./u-boot-dtb.bin of=/dev/sdc bs=512 skip=49 >>>> >>>> ... >>>> >>>> u-boot 3.10rc3 (same happens with v2014.07 or 2014.04): >>>> >>>> U-Boot 2014.10-rc3 (Oct 07 2014 - 13:26:48) for ARNDALE >>>> >>>> CPU: Exynos5250@1000MHz >>>> >>>> Board: Arndale >>>> I2C: i2c_init: failed to init bus 0 for speed = 100000 >>>> ready >>>> DRAM: 2 GiB >>>> trace: copying 00086db4 bytes of early data from 50000000 to beff0000 >>>> trace: enabled >>>> WARNING: Caches not enabled >>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 >>>> dwmci_send_cmd: DATA ERROR! >>>> i2c_init: failed to init bus 0 for speed = 100000 >>>> In: serial >>>> Out: serial >>>> Err: serial >>>> Net: Net Initialization Skipped >>>> No ethernet found. >>>> Hit any key to stop autoboot: 0 >>>> ARNDALE # printenv >>>> baudrate=115200 >>>> bootargs=console=ttySAC2,115200n8 root=/dev/mmcblk1p1 rw rootwait debug >>>> earlyprintk >>>> bootcmd=run bootcmd_ubuntu >>>> bootcmd_ubuntu=run loadk; run loadf; run loadr; bootm ${kernel_addr_r} >>>> ${ramdisk_addr_r}:${filesize} ${fdt_addr_r} >>>> bootdelay=3 >>>> fdt_addr_r=0x41000000 >>>> filesize=5b9902 >>>> kernel_addr_r=0x40007000 >>>> loadf=ext2load mmc 1:1 ${fdt_addr_r} /boot/exynos5250-arndale.dtb >>>> loadk=ext2load mmc 1:1 ${kernel_addr_r} /boot/uImage >>>> loadr=ext2load mmc 1:1 ${ramdisk_addr_r} /boot/uInitrd >>>> ramdisk_addr_r=0x42000000 >>>> stderr=serial >>>> stdin=serial >>>> stdout=serial >>>> >>>> Environment size: 589/16380 bytes >>>> ARNDALE # run loadk >>>> 6002946 bytes read in 1117 ms (5.1 MiB/s) >>>> ARNDALE # bootm ${kernel_addr_r} >>>> ## Booting kernel from Legacy Image at 40007000 ... >>>> Image Name: kernel 3.16.0-20-generic >>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>> Data Size: 6002882 Bytes = 5.7 MiB >>>> Load Address: 40008000 >>>> Entry Point: 40008000 >>>> Verifying Checksum ... OK >>>> Loading Kernel Image ... OK >>>> >>>> Starting kernel ...(fake run for tracing) >>>> >>>> Starting kernel ... >>>> >>>> [stuck here] >>> >>> >>> I faced this problem some times ago. Try to modify kernel, initrd and fdt >>> addresses. >>> >>> >>> Guillaume >>> >> >> > -- bye, p. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
