On Tue, Sep 23, 2014 at 06:07:01PM +0300, Roger Quadros wrote: > The DMA/FIS buffers are set in ahci_port_start() which is called > after ahci_host_init(). So don't start the DMA engine here > (i.e. don't set FIS_RX) > > This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x) > WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 > l3_interrupt_handler+0x260/0x358() > 44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in > User mode during Functional access > > Signed-off-by: Roger Quadros <rog...@ti.com>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot