Add short documentation-alike note on how to use the Altera SPI driver with the EPCS/EPCQx1 FPGA IP block on SoCFPGA Cyclone V into doc/SPI/README.altera_spi
Signed-off-by: Marek Vasut <[email protected]> Cc: Chin Liang See <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Albert Aribaud <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Jagannadha Sutradharudu Teki <[email protected]> --- doc/SPI/README.altera_spi | 6 ++++++ 1 files changed, 6 insertions(+) create mode 100644 doc/SPI/README.altera_spi V2: Move the documentation into doc/SPI/README.altera_spi diff --git a/doc/SPI/README.altera_spi b/doc/SPI/README.altera_spi new file mode 100644 index 0000000..b07449f --- /dev/null +++ b/doc/SPI/README.altera_spi @@ -0,0 +1,6 @@ +SoCFPGA EPCS/EPCQx1 mini howto: +- Instantiate EPCS/EPCQx1 Serial flash controller in QSys and rebuild +- The controller base address is the "Base" in QSys + 0x400 +- Set MSEL[4:0]=10010 (AS Standard) +- Load the bitstream into FPGA, enable bridges +- Only then will the driver work -- 2.0.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
