Hi, On Oct 22, 2014 11:10 PM, "Andreas Bießmann" <[email protected]> wrote: > > It also seems the maintainer of snapper9260 is not reachable. Simon, do > you own such a board?
Yes I have one. The base address is to make the maximum amount of room for loading the kernel, etc. Regards, Simon > > Best regards > > Andreas Bießmann > > On 23.10.14 07:07, Andreas Bießmann wrote: > > Dear Simon, > > > > On 06.10.14 20:14, Simon Glass wrote: > >> The value should be 0x23f00000. Fix it. > >> > >> Signed-off-by: Simon Glass <[email protected]> --- > >> > >> include/configs/snapper9260.h | 2 +- 1 file changed, 1 > >> insertion(+), 1 deletion(-) > >> > >> diff --git a/include/configs/snapper9260.h > >> b/include/configs/snapper9260.h index 1ebee71..adb09c2 100644 --- > >> a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h > >> @@ -15,7 +15,7 @@ #include <asm/hardware.h> #include > >> <linux/sizes.h> > >> > >> -#define CONFIG_SYS_TEXT_BASE 0x20000000 +#define > >> CONFIG_SYS_TEXT_BASE 0x23f00000 > > > > I wonder why this is required. It depends on the first stage loader > > snapper9260 uses and I guess the first value is the right one used in > > the factory programmed loader. > > Nevertheless other at91 boards use 0x21f00000 due to relocation issues > > on boards with less RAM. It seems the snapper9260 has just 64MiB of > > RAM, this means just 1MiB of space for relocated u-boot, malloc arena, > > ... This was exactly the reason for other at91 boards to switch to > > 0x21f00000 as base address. > > > > Best regards > > > > Andreas Bießmann > >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
