Change SST25* flash sector size to 4KiB to match SECT_4K. This makes 'sf erase offset +len' work on real 4KiB boundary instead of 64KiB.
Signed-off-by: Bin Meng <bmeng...@gmail.com> --- drivers/mtd/spi/sf_params.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index d5f3597..dd3baa4 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -88,16 +88,16 @@ const struct spi_flash_params spi_flash_params_table[] = { {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, #endif #ifdef CONFIG_SPI_FLASH_SST /* SST */ - {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_SLOW, SECT_4K | SST_WP}, - {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_SLOW, SECT_4K | SST_WP}, - {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_SLOW, SECT_4K | SST_WP}, - {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_SLOW, SECT_4K | SST_WP}, - {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_EXTN, SECT_4K}, - {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_SLOW, SECT_4K | SST_WP}, - {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_SLOW, SECT_4K | SST_WP}, - {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_SLOW, SECT_4K | SST_WP}, - {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_SLOW, SECT_4K | SST_WP}, - {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_SLOW, SECT_4K | SST_WP}, + {"SST25VF040B", 0xbf258d, 0x0, 4 * 1024, 128, RD_SLOW, SECT_4K | SST_WP}, + {"SST25VF080B", 0xbf258e, 0x0, 4 * 1024, 256, RD_SLOW, SECT_4K | SST_WP}, + {"SST25VF016B", 0xbf2541, 0x0, 4 * 1024, 512, RD_SLOW, SECT_4K | SST_WP}, + {"SST25VF032B", 0xbf254a, 0x0, 4 * 1024, 1024, RD_SLOW, SECT_4K | SST_WP}, + {"SST25VF064C", 0xbf254b, 0x0, 4 * 1024, 2048, RD_EXTN, SECT_4K}, + {"SST25WF512", 0xbf2501, 0x0, 4 * 1024, 16, RD_SLOW, SECT_4K | SST_WP}, + {"SST25WF010", 0xbf2502, 0x0, 4 * 1024, 32, RD_SLOW, SECT_4K | SST_WP}, + {"SST25WF020", 0xbf2503, 0x0, 4 * 1024, 64, RD_SLOW, SECT_4K | SST_WP}, + {"SST25WF040", 0xbf2504, 0x0, 4 * 1024, 128, RD_SLOW, SECT_4K | SST_WP}, + {"SST25WF080", 0xbf2505, 0x0, 4 * 1024, 256, RD_SLOW, SECT_4K | SST_WP}, #endif #ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0}, -- 1.8.2.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot