From: Hao Zhang <hzh...@ti.com>
As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514
Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires
that certain registers get written in order to restart
autonegotiation.
Signed-off-by: Hao Zhang <hzh...@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronz...@ti.com>
---
drivers/net/phy/marvell.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index d2ecadc..425db94 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -276,6 +276,55 @@ static int m88e1111s_config(struct phy_device *phydev)
return 0;
}
+/**
+ * m88e1518_phy_writebits - write bits to a register
+ */
+void m88e1518_phy_writebits(struct phy_device *phydev,
+ u8 reg_num, u16 offset, u16 len, u16 data)
+{
+ u16 reg, mask;
+
+ if ((len + offset) >= 16)
+ mask = 0 - (1 << offset);
+ else
+ mask = (1 << (len + offset)) - (1 << offset);
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num);
+
+ reg &= ~mask;
+ reg |= data << offset;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
+}
+
+static int m88e1518_config(struct phy_device *phydev)
+{
+ /*
+ * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514
+ * Rev A0, Errata Section 3.1
+ */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* reg page 0xff */
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */
+ /* Write HWCFG_MODE = SGMII to Copper */
+ m88e1518_phy_writebits(phydev, 20, 0, 3, 1);
+
+ /* Phy reset */
+ m88e1518_phy_writebits(phydev, 20, 15, 1, 1);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */
+ udelay(100);
+
+ return m88e1111s_config(phydev);
+}
+
/* Marvell 88E1118 */
static int m88e1118_config(struct phy_device *phydev)
{
@@ -493,7 +542,7 @@ static struct phy_driver M88E1518_driver = {
.uid = 0x1410dd1,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
- .config = &m88e1111s_config,
+ .config = &m88e1518_config,
.startup = &m88e1011s_startup,
.shutdown = &genphy_shutdown,
};
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
