Dear Roar, In message <CA+_CDE6xKC=ffxpue-ns8lutn7hcq0vd2wzjissw7g+32os...@mail.gmail.com> you wrote: > > I have a MPC8641 board which have corrupt flash and I have to restore > the bootloader on the card.
What is the exact board name - who is the vendor? I'm asking because you really have to make sure that you are running unmodified mainline U-Boot on that board. > The card had version 1.1.6, but I have no access to a powerpc so I can't > compile > the source code. U-Boot can be cross compiled on any x86 PC. > Is there a place where I can fine a bin file ? > Or could someone who have access to a powerpc with gcc compiler > compile version 1.1.6 for me ? > > Or is it possible to get the bootloader file from a card that works ? > > > The command to install the bootloader is this : > > => fload tftp fc000000 bootromF64.bin This is not U-Boot syntax. Mainline U-Boot does not support something as a "fload" command. What sort of softewaare is running at this point of time? Do you have access to the original source code of the boot loader running on your system? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Perl already has an IDE. It's called Unix. -- Tom Christiansen in 375bd...@cs.colorado.edu _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot