Hello Andrew,
Am 04.11.2014 17:07, schrieb Andrew Ruder:
The UBI layer will disable much of its error reporting when it is
compiled into the linux kernel to avoid stopping boot. We want this
error reporting in U-Boot since we don't initialize the UBI layer until
it is used and want the error reporting.
We force this by telling the UBI layer we are building as a module.
Signed-off-by: Andrew Ruder<andrew.ru...@elecsyscorp.com>
Cc: Wolfgang Denk<w...@denx.de>
Cc: Heiko Schocher<h...@denx.de>
Cc: Kyungmin Park<kmp...@infradead.org>
---
include/ubi_uboot.h | 2 ++
1 file changed, 2 insertions(+)
I posted such a question [1] on the ML ...
The problem is in generally enabling this feature in the size impact ...
This should be discussed if we want this for all boards ...
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
index 1fd15f4..6ff0e23 100644
--- a/include/ubi_uboot.h
+++ b/include/ubi_uboot.h
@@ -51,6 +51,8 @@
#undef CONFIG_MTD_UBI_BLOCK
+#define CONFIG_MTD_UBI_MODULE
+
#if !defined(CONFIG_MTD_UBI_BEB_LIMIT)
#define CONFIG_MTD_UBI_BEB_LIMIT 20
#endif
Ok, didn;t tried this with enabling "CONFIG_MTD_UBI_MODULE" ...
But the name CONFIG_MTD_UBI_MODULE is not perfect, if we want
just to enable error messages ...
bye,
Heiko
[1] http://patchwork.ozlabs.org/patch/405259/
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
