Hello Anatolij,
Am 22.10.2014 12:09, schrieb Anatolij Gustschin:
Hi all,
On Wed, 22 Oct 2014 11:29:51 +0200
Christian Gmeiner<[email protected]> wrote:
Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way
to define a GPIO line, which can be used to force CS high
across multiple transactions. In order to fix sf detection
change board code to make use of board_spi_cs_gpio(..).
Signed-off-by: Christian Gmeiner<[email protected]>
---
board/bachmann/ot1200/ot1200.c | 5 +++++
include/configs/ot1200.h | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
There are another two board that might be affected:
$ grep --exclude=ot1200.h -r SF_DEFAULT_CS include/configs/ | grep IMX_GPIO_NR
include/configs/aristainetos.h:#define CONFIG_SF_DEFAULT_CS
(0|(IMX_GPIO_NR(3, 20)<<8))
include/configs/tqma6.h:#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(3,
19)<< 8))
So, I'm CC'ing board maintainers, please test/fix them too. Thanks!
thanks for adding me to cc !
I fix this issue here:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=2f6bb0a9419ec8016524142cb54fef81038b346e
already applied in the u-boot.imx tree ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
