Dear Steve,
In message <[email protected]> you wrote:
>
> In my experience, we would normally set the CROSS_COMPILE variable to
> the "prefix" of the cross compiler toolchain, for example:
>
> CROSS_COMPILE=/opt/eldk-5.4/armv7a/sysroots/i686-eldk-linux/usr/bin/armv7a-vfp-neon-linux-gnueabi/arm-linux-gnueabi-
Actually we should have only
CROSS_COMPILE=arm-linux-gnueabi-
and make the PATH take care of where to pick the tools from.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected]
Your csh still thinks true is false. Write to your vendor today and
tell them that next year Configure ought to "rm /bin/csh" unless they
fix their blasted shell. :-)
- Larry Wall in Configure from the perl distribution
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
