The current vbus GPIOs on snow make very little sense, their number is
far above the maximum. As a result, USB doesn't work on snow.
Correct the GPIO numbering so they match the current scheme for exynos5.
Tested both EHCI and XHCI to correctly work after this change.
Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk>
---
arch/arm/dts/exynos5250-snow.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 6fd9275..95af025 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -131,11 +131,11 @@
};
ehci@12110000 {
- samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
+ samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
};
xhci@12000000 {
- samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
+ samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
};
tmu@10060000 {
--
2.1.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
