some boards might want to use USB1 for host,
without fiddling those registers it'll be
impossible.
Signed-off-by: Felipe Balbi <ba...@ti.com>
---
arch/arm/cpu/armv7/omap5/prcm-regs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c
b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff08ef4..0745d42 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -376,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_status = 0x4A002134,
+ .control_phy_power_usb = 0x4A002370,
.control_phy_power_sata = 0x4A002374,
.control_core_mac_id_0_lo = 0x4A002514,
.control_core_mac_id_0_hi = 0x4A002518,
@@ -800,6 +801,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_clkmode_dpll_dsp = 0x4a005234,
.cm_shadow_freq_config1 = 0x4a005260,
.cm_clkmode_dpll_gmac = 0x4a0052a8,
+ .cm_coreaon_usb_phy_core_clkctrl = 0x4a008640,
.cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688,
/* cm1.mpu */
@@ -906,6 +908,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_gmac_gmac_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
.cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
+ .cm_l3init_usb_otg_ss_clkctrl = 0x4a0093f0,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009700,
--
2.1.0.GIT
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
