Dear bomellberg, In message <1415622808801-195379.p...@n7.nabble.com> you wrote: > Upon further investigation, it seems like the board DOES receive the 0x01 > START_CHAR. An RS232 sniffer shows that the 0x01 is being sent, and the > board answers 'S'. It does not show on the console though. > > I will need to go deeper into the code to see why it fails. Both CKermit and > TeraTerm makes several tries, but nothing is transferred.
I just tested "loadb" on a MPC5200 system running current top of tree against C-Kermit 8.0.211, 10 Apr 2004, for Linux; it works without any problems here. Which sort of hardware are you using? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "If the code and the comments disagree, then both are probably wrong." - Norm Schryer _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot