On 10 November 2014 10:41, Hyungwon Hwang <human.hw...@samsung.com> wrote:
> This is v6 of the patchset adding support Odroud XU3 board. > > link to the previous version: > v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html > v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html > v4: https://patchwork.ozlabs.org/patch/407411/ > v5: https://patchwork.ozlabs.org/patch/407941/ > > This patchset fixes GPIO information of Exynos5420 which is needed to > support Exynos5422 Odroid XU3 board. On the base of the fixes, this > patchset adds support for Exynos5422 Odroid XU3 board. I have done this > work on the master branch in http://git.denx.de/u-boot-samsung.git (sha1: > 26f195c71252e98aebfffd5cfa994a4475559370) with patches by Akshay Saraswat. > > link: https://patchwork.ozlabs.org/patch/405246/ (updated) > > How to test this patch: > 1. git clone http://git.denx.de/u-boot-samsung.git > 2. git reset --hard 26f195c71252e98aebfffd5cfa994a4475559370 > 3. Get and apply the patchset of Akshay Saraswat > https://patchwork.ozlabs.org/patch/405246/ > https://patchwork.ozlabs.org/patch/405247/ > https://patchwork.ozlabs.org/patch/405248/ > https://patchwork.ozlabs.org/patch/405249/ > https://patchwork.ozlabs.org/patch/405250/ > https://patchwork.ozlabs.org/patch/405251/ > https://patchwork.ozlabs.org/patch/405252/ > 4. Apply this patchset > 5. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config > 6. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8 > 7. Now you can use u-boot-dtb.bin for your downloading > > Note: If you use micro SD card for your test you have to apply the below > patch additionally. This patch is needed, because micro sd card is > recognized as MMC1 instead of MMC0. Additional work is needed to make it > work regardless of device id. > > diff --git a/include/configs/exynos5-common.h > b/include/configs/exynos5-common.h > index ba591e7..437eaae 100644 > --- a/include/configs/exynos5-common.h > +++ b/include/configs/exynos5-common.h > @@ -109,7 +109,7 @@ > > #define CONFIG_SYS_MONITOR_BASE 0x00000000 > > -#define CONFIG_SYS_MMC_ENV_DEV 0 > +#define CONFIG_SYS_MMC_ENV_DEV 1 > > #define CONFIG_SECURE_BL1_ONLY > > diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h > index cda4f26..b46ccad 100644 > --- a/include/configs/odroid_xu3.h > +++ b/include/configs/odroid_xu3.h > @@ -110,15 +110,15 @@ > "run kernel_args;" \ > "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \ > "autoboot=" \ > - "if test -e mmc 0 Image.itb; then; " \ > + "if test -e mmc 1 Image.itb; then; " \ > "run boot_fit;" \ > - "elif test -e mmc 0 zImage; then; " \ > + "elif test -e mmc 1 zImage; then; " \ > "run boot_zimg;" \ > - "elif test -e mmc 0 uImage; then; " \ > + "elif test -e mmc 1 uImage; then; " \ > "run boot_uimg;" \ > "fi;\0" \ > "console=" CONFIG_DEFAULT_CONSOLE \ > - "mmcbootdev=0\0" \ > + "mmcbootdev=1\0" \ > "mmcbootpart=1\0" \ > "mmcrootdev=0\0" \ > "mmcrootpart=2\0" \ > I think you can make it selectable as env value. How you think? Thanks, Minkyu Kang.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot