From: Fabio Estevam <[email protected]> We can simply the return the value from enable_fec_anatop_clock() to make the code smaller and simpler.
Signed-off-by: Fabio Estevam <[email protected]> --- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 68d3718..857a196 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -119,7 +119,6 @@ static int setup_fec(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int ret; int reg; /* Use 125MHz anatop loopback REF_CLK1 for ENET1 */ @@ -140,11 +139,7 @@ static int setup_fec(void) reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; writel(reg, &anatop->pll_enet); - ret = enable_fec_anatop_clock(ENET_125MHz); - if (ret) - return ret; - - return 0; + return enable_fec_anatop_clock(ENET_125MHz); } int board_eth_init(bd_t *bis) -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
