Hi Stefano
2014-11-13 16:34 GMT+01:00 Stefano Babic <[email protected]>: > On 11/11/2014 12:57, Christian Gmeiner wrote: >> Today I got the final board and found out that a different >> connector is used as the one on my development board. The >> new connector has swaped pins for cd and wp. >> >> This change is tested on a production ready baord. >> > > I fixed it myself. > Thanks a lot! >> Signed-off-by: Christian Gmeiner <[email protected]> >> --- >> board/bachmann/ot1200/ot1200.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c >> index 2ed8cf7..007c1ef 100644 >> --- a/board/bachmann/ot1200/ot1200.c >> +++ b/board/bachmann/ot1200/ot1200.c >> @@ -159,8 +159,8 @@ int board_mmc_getcd(struct mmc *mmc) >> gpio_direction_input(IMX_GPIO_NR(4, 5)); >> ret = gpio_get_value(IMX_GPIO_NR(4, 5)); >> } else { >> - gpio_direction_input(IMX_GPIO_NR(1, 4)); >> - ret = !gpio_get_value(IMX_GPIO_NR(1, 4)); >> + gpio_direction_input(IMX_GPIO_NR(1, 5)); >> + ret = !gpio_get_value(IMX_GPIO_NR(1, 5)); >> } >> >> return ret; >> > > Applied to u-boot-imx, thanks ! > greets -- Christian Gmeiner, MSc https://soundcloud.com/christian-gmeiner _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
