Hello Suriyan,
On 11/18/2014 04:30 AM, Suriyan Ramasami wrote:
Hello Minkyu Kang/Przemyslaw and of course anyone else who can direct me,
Thanks for the commit.
I just realized that the code in this particular patch is missing
the gpio_request() call before calling the gpio_direction_output()
call, and hence fails to initialize the USB3503A hub. This was pointed
out by Przemyslaw in another patch of mine (odroid: blue LED)
So, my question is, this patch is in u-boot-samsung. To correct the
above mentioned error, do I submit a patch directed to u-boot-samsung?
If so how do I do it? I mean, do I elaborate this in the subject
/.body of the mail?
Thanks and regards,
- Suriyan
Yes, the gpio_request() was missed in your code - it prints errors about
it but the HUB works fine. So when you send the fixed version this
should be okay. Please check ums command before send.
Please also check setting buck value at function board_usb_init(),
the buck is disabled and before enable - the value changes two times -
probably by mistake.
And the gpio_request(...) you can put into board_gpio_init - request
gpio only one.
The odroid is available on the market, so I would prefer keep some
documentation in the doc/README.odroid.
Could you please add short section about the USB usage in U-Boot? This
would be useful.
On Mon, Nov 17, 2014 at 6:02 AM, Minkyu Kang <mk7.k...@samsung.com> wrote:
On 30/10/14 01:22, Suriyan Ramasami wrote:
This change adds support for enabling the USB host features of the board.
This includes the USB3503A hub and the SMC LAN9730 ethernet controller
as well.
Signed-off-by: Suriyan Ramasami <suriya...@gmail.com>
---
Changes in v3:
* removed set_usb_ethaddr() and related code as the GUID registers do not
seem to be documented anywhere. This is sad, as this mechanism allows
for each Odroid to boot up with the same MAC address every time, but no
two odroids shall have the same MAC address on boot. This ensures multiple
odroids in the same LAN to come up without conflicting MAC addresses.
* Minkyu - Do not mix cpu_is... and proid_is...
Changes in v2:
* Jaehoon - Split power.[ch] as a separate patch
* Removed an unneeded header file from ehci-exynos.c
* Jaehoon - Fix indentation in the dts file
Changes in v1:
* First try
arch/arm/dts/exynos4412-odroid.dts | 11 +++++++
arch/arm/include/asm/arch-exynos/ehci.h | 13 ++++++++
board/samsung/odroid/odroid.c | 32 +++++++++++++++++++
drivers/usb/host/ehci-exynos.c | 55 ++++++++++++++++++++++++++++-----
include/configs/odroid.h | 13 ++++++++
5 files changed, 116 insertions(+), 8 deletions(-)
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
