Rename interrupt_init() in arch/x86/lib/pcat_interrupts.c to
i8259_init() and create a new interrupt_init() in
arch/x86/cpu/interrupt.c to call i8259_init() followed by a
call to cpu_init_interrupts().

Signed-off-by: Bin Meng <[email protected]>
---
 arch/x86/cpu/interrupts.c      | 26 ++++++++++++++++++++------
 arch/x86/include/asm/i8259.h   |  2 ++
 arch/x86/lib/pcat_interrupts.c |  9 +--------
 3 files changed, 23 insertions(+), 14 deletions(-)

diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index 51e2c59..ea03724 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -20,6 +20,7 @@
 #include <linux/compiler.h>
 #include <asm/msr.h>
 #include <asm/u-boot-x86.h>
+#include <asm/i8259.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -128,9 +129,6 @@ int cpu_init_interrupts(void)
        int irq_entry_size = irq_1 - irq_0;
        void *irq_entry = (void *)irq_0;
 
-       /* Just in case... */
-       disable_interrupts();
-
        /* Setup the IDT */
        for (i = 0; i < 256; i++) {
                idt[i].access = 0x8e;
@@ -146,9 +144,6 @@ int cpu_init_interrupts(void)
 
        load_idt(&idt_ptr);
 
-       /* It is now safe to enable interrupts */
-       enable_interrupts();
-
        return 0;
 }
 
@@ -172,6 +167,25 @@ int disable_interrupts(void)
        return flags & X86_EFLAGS_IF;
 }
 
+int interrupt_init(void)
+{
+       /* Just in case... */
+       disable_interrupts();
+
+#ifdef CONFIG_SYS_PCAT_INTERRUPTS
+       /* Initialize the master/slave i8259 pic */
+       i8259_init();
+#endif
+
+       /* Initialize core interrupt and exception functionality of CPU */
+       cpu_init_interrupts();
+
+       /* It is now safe to enable interrupts */
+       enable_interrupts();
+
+       return 0;
+}
+
 /* IRQ Low-Level Service Routine */
 void irq_llsr(struct irq_regs *regs)
 {
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index 73113f9..bc4033b 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -69,4 +69,6 @@
 #define        ICW4_AEOI       0x02    /* Automatic EOI Mode */
 #define ICW4_PM                0x01    /* Microprocessor Mode */
 
+int i8259_init(void);
+
 #endif
diff --git a/arch/x86/lib/pcat_interrupts.c b/arch/x86/lib/pcat_interrupts.c
index 2ce371e..27c7f08 100644
--- a/arch/x86/lib/pcat_interrupts.c
+++ b/arch/x86/lib/pcat_interrupts.c
@@ -24,12 +24,10 @@
 #error "CONFIG_SYS_NUM_IRQS must equal 16 if CONFIG_SYS_NUM_IRQS is defined"
 #endif
 
-int interrupt_init(void)
+int i8259_init(void)
 {
        u8 i;
 
-       disable_interrupts();
-
        /* Mask all interrupts */
        outb(0xff, MASTER_PIC + IMR);
        outb(0xff, SLAVE_PIC + IMR);
@@ -62,11 +60,6 @@ int interrupt_init(void)
         */
        unmask_irq(2);
 
-       /* Initialize core interrupt and exception functionality of CPU */
-       cpu_init_interrupts();
-
-       enable_interrupts();
-
        return 0;
 }
 
-- 
1.8.2.1

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to