No one is using CONFIG_EDT32F10; remove related code.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Anatolij Gustschin <ag...@denx.de>
Acked-by: Simon Glass <s...@chromium.org>
---
Changes in V2:
- No changes.
drivers/video/mpc8xx_lcd.c | 28 ----------------------------
include/configs/R360MPI.h | 1 -
2 files changed, 29 deletions(-)
diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c
index 98b9f5e..3ea240d 100644
--- a/drivers/video/mpc8xx_lcd.c
+++ b/drivers/video/mpc8xx_lcd.c
@@ -34,11 +34,6 @@
#define CONFIG_LCD_INFO /* Display Logo, (C) and system info
*/
#endif
-#if defined(CONFIG_EDT32F10)
-#undef CONFIG_LCD_LOGO
-#undef CONFIG_LCD_INFO
-#endif
-
/*----------------------------------------------------------------------*/
#ifdef CONFIG_KYOCERA_KCS057QV1AJ
/*
@@ -224,20 +219,6 @@ vidinfo_t panel_info = {
};
#endif /* CONFIG_OPTREX_BW */
-/*-----------------------------------------------------------------*/
-#ifdef CONFIG_EDT32F10
-/*
- * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
- */
-#define LCD_BPP LCD_MONOCHROME
-#define LCD_DF 10
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0
-};
-#endif
-
/************************************************************************/
/* ----------------- chipset specific functions ----------------------- */
/************************************************************************/
@@ -305,7 +286,6 @@ void lcd_ctrl_init (void *lcdbase)
immr->im_clkrst.car_sccr &= ~0x1F;
immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
-#if !defined(CONFIG_EDT32F10)
/* Enable LCD on port D.
*/
immr->im_ioport.iop_pdpar |= 0x1FFF;
@@ -315,14 +295,6 @@ void lcd_ctrl_init (void *lcdbase)
*/
immr->im_cpm.cp_pbpar |= 0x00005001;
immr->im_cpm.cp_pbdir |= 0x00005001;
-#else
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1DFF;
- immr->im_ioport.iop_pdpar &= ~0x0200;
- immr->im_ioport.iop_pddir |= 0x1FFF;
- immr->im_ioport.iop_pddat |= 0x0200;
-#endif
/* Load the physical address of the linear frame buffer
* into the LCD controller.
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 009d1cf..fbaf6a5 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -24,7 +24,6 @@
#define CONFIG_LCD
#define CONFIG_MPC8XX_LCD
-#undef CONFIG_EDT32F10
#define CONFIG_SHARP_LQ057Q3DC02
#define CONFIG_SPLASH_SCREEN
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
