Hi York, On Fri, Dec 5, 2014 at 10:27 AM, York Sun <york...@freescale.com> wrote: > > On 11/10/2014 02:32 AM, Shengzhou Liu wrote: > > Add support for Cortina CS4315/CS4340 10G PHY. > > - This driver loads CS43xx firmware from NOR/NAND/SPI/SD device > > to initialize Cortina PHY. > > - Cortina PHY has non-standard offset of PHY ID registers, thus > > we define own get_phy_id() to override default get_phy_id(). > > - To define macro CONFIG_PHY_CORTINA will enable this driver. > > > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > > --- > > v7: reorder it in alphabetical order in Makefile > > v6: polish it in phy.c and phy.h in alphabetical order > > v5: fix unclaimed variable in case of nand boot. > > v4: add support for loading cortina phy ucode from NAND/SPI/SD > > v3: move devad as '0' in cortina.c instead of in phy.c > > v2: no change. > > > Applied to u-boot-mpc85xx, awaiting upstream.
Were my concerns from Nov 25 addressed? Thanks, -Joe
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
