Hi Andrew, On 11/05/2014 08:31 PM, Andrew Ruder wrote: > The UBI layer will disable much of its error reporting when it is > compiled into the linux kernel to avoid stopping boot. We want this > error reporting in U-Boot since we don't initialize the UBI layer until > it is used and want the error reporting. > > We force this by telling the UBI layer we are building as a module. > > Signed-off-by: Andrew Ruder <andrew.ru...@elecsyscorp.com> > Cc: Wolfgang Denk <w...@denx.de> > Cc: Heiko Schocher <h...@denx.de> > Cc: Kyungmin Park <kmp...@infradead.org> > --- > include/ubi_uboot.h | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h > index 1fd15f4..324fe72 100644 > --- a/include/ubi_uboot.h > +++ b/include/ubi_uboot.h > @@ -51,6 +51,14 @@ > > #undef CONFIG_MTD_UBI_BLOCK > > +/* ubi_init() disables returning error codes when built into the Linux > + * kernel so that it doesn't hang the Linux kernel boot process. Since > + * the U-Boot driver code depends on getting valid error codes from this > + * function we just tell the UBI layer that we are building as a module > + * (which only enables the additional error reporting). > + */ > +#define CONFIG_MTD_UBI_MODULE > + > #if !defined(CONFIG_MTD_UBI_BEB_LIMIT) > #define CONFIG_MTD_UBI_BEB_LIMIT 20 > #endif >
I applied this patch but apparently I'm suffering a memory leak in a certain condition. I wonder if you can reproduce it: 1. Assume you have an empty partition called "MyPart". 2. Write it with some dummy data: => mw.l $loadaddr deadbeed 1000 => nand write $loadaddr MyPart 1000 3. Set it as the UBI part: => ubi part MyPart This (which returned 0 before, despite failing during the attach procedure now should return an error). 4. Run the command again several times: => ubi part MyPart => ubi part MyPart In my case, after calling this three times, the target hangs. I think the exit path in ubi_init() does not properly free every allocated memory. I was not able to find the root cause, though. Regards -- Hector Palacios _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot