On 06/12/14 05:26, Sjoerd Simons wrote: > Add samsung,vbus-gpio information for the XU3. This allows the usage of > the EHCI controller on the XU3, which is connected to the SMSC LAN9514 > chip (usb hub + network). > > Signed-off-by: Sjoerd Simons <[email protected]> > --- > Changes since v1: > + Correct gpio number > + Add USB configuration in the odroid XU3 default config > > Hyungwon could you add this one to your XU3 patchset if you send a next > version (assuming it looks good)? > > For usb storage/network support this patch should be combined > with the exynos configuration tweaks patch i submited earlier to the list: > Exynos: Move down common USB configuration > > arch/arm/dts/exynos5422-odroidxu3.dts | 4 ++++ > include/configs/odroid_xu3.h | 4 ++++ > 2 files changed, 8 insertions(+) > > diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts > b/arch/arm/dts/exynos5422-odroidxu3.dts > index cff32a9..79a7acd 100644 > --- a/arch/arm/dts/exynos5422-odroidxu3.dts > +++ b/arch/arm/dts/exynos5422-odroidxu3.dts > @@ -31,6 +31,10 @@ > 0xb0000000 0xea00000>; > }; > > + ehci@12110000 { > + samsung,vbus-gpio = <&gpio 0x66 0>; /* X26 */ > + }; > + > serial@12C20000 { > status="okay"; > }; > diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h > index 88bb98d..aa0c142 100644 > --- a/include/configs/odroid_xu3.h > +++ b/include/configs/odroid_xu3.h > @@ -47,6 +47,10 @@ > > #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" > > +/* USB */ > +#define CONFIG_USB_EHCI > +#define CONFIG_USB_EHCI_EXYNOS > + > /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ > #undef CONFIG_EXYNOS_TMU > #undef CONFIG_TMU_CMD_DTT >
applied to u-boot-samsung. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
