This regulator is used with AM437x IDK to feed
VDD_MPU, without means to scale VDD_MPU we can't
support higher frequencies.

Signed-off-by: Felipe Balbi <[email protected]>
---
 drivers/power/pmic/Makefile        |  1 +
 drivers/power/pmic/pmic_tps62362.c | 47 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 drivers/power/pmic/pmic_tps62362.c

diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index e7b07eb..985cfdb 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
 obj-$(CONFIG_POWER_TPS65090_I2C) += pmic_tps65090.o
 obj-$(CONFIG_POWER_TPS65090_EC) += pmic_tps65090_ec.o
 obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
+obj-$(CONFIG_POWER_TPS65218) += pmic_tps62362.o
 obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
 obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/pmic/pmic_tps62362.c 
b/drivers/power/pmic/pmic_tps62362.c
new file mode 100644
index 0000000..2123685
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps62362.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2014 Texas Instruments Incorporated -  http://www.ti.com
+ * Author: Felipe Balbi <[email protected]>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/errno.h>
+#include <power/pmic.h>
+#include <power/tps62362.h>
+
+/**
+ * tps62362_voltage_update() - Function to change a voltage level, as this
+ *                            is a multi-step process.
+ * @reg:       Register address to write to
+ * @volt_sel:  Voltage register value to write
+ * @return:    0 on success, 1 on failure
+ */
+int tps62362_voltage_update(unsigned char reg, unsigned char volt_sel)
+{
+       if (reg > TPS62362_NUM_REGS)
+               return 1;
+
+       return i2c_write(TPS62362_I2C_ADDR, reg, 1, &volt_sel, 1);
+}
+
+int power_tps62362_init(unsigned char bus)
+{
+       static const char name[] = "TPS62362";
+       struct pmic *p = pmic_alloc();
+
+       if (!p) {
+               printf("%s: POWER allocation error!\n", __func__);
+               return -ENOMEM;
+       }
+
+       p->name = name;
+       p->interface = PMIC_I2C;
+       p->number_of_regs = TPS62362_NUM_REGS;
+       p->hw.i2c.addr = TPS62362_I2C_ADDR;
+       p->hw.i2c.tx_num = 1;
+       p->bus = bus;
+
+       return 0;
+}
-- 
2.2.0

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to