At present the normal update (which happens much later) does not work. This
seems to have something to do with the 'no eviction' mode in the CAR, or at
least moving the microcode update after that causes it not to work.
For now, do an update early on so that it definitely works. Also refuse to
continue unless the microcode update check (later in boot) is successful.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/x86/cpu/ivybridge/car.S | 14 ++++++++++++++
arch/x86/cpu/ivybridge/cpu.c | 2 +-
arch/x86/cpu/ivybridge/microcode_intel.c | 9 +++++++--
arch/x86/dts/link.dts | 3 ---
4 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/arch/x86/cpu/ivybridge/car.S b/arch/x86/cpu/ivybridge/car.S
index 6e7e1e4..95da087 100644
--- a/arch/x86/cpu/ivybridge/car.S
+++ b/arch/x86/cpu/ivybridge/car.S
@@ -45,6 +45,14 @@ car_init:
movl $0xFEE00300, %esi
movl %eax, (%esi)
+ /* TODO: Load microcode later - the 'no eviction' mode breaks this */
+ movl $0x79, %ecx
+ xorl %edx, %edx
+ movl $_dt_ucode_base_size, %eax
+ movl (%eax), %eax
+ addl $0x30, %eax
+ wrmsr
+
post_code(POST_CAR_SIPI)
/* Zero out all fixed range and variable range MTRRs */
movl $mtrr_table, %esi
@@ -228,3 +236,9 @@ mtrr_table:
.word 0x20C, 0x20D, 0x20E, 0x20F
.word 0x210, 0x211, 0x212, 0x213
mtrr_table_end:
+
+ .align 4
+_dt_ucode_base_size:
+ /* These next two fields are filled in by ifdtool */
+ .long 0 /* microcode base */
+ .long 0 /* microcode size */
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index 0543e06..e925310 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -263,7 +263,7 @@ int print_cpuinfo(void)
enable_lapic();
ret = microcode_update_intel();
- if (ret && ret != -ENOENT && ret != -EEXIST)
+ if (ret)
return ret;
/* Enable upper 128bytes of CMOS */
diff --git a/arch/x86/cpu/ivybridge/microcode_intel.c
b/arch/x86/cpu/ivybridge/microcode_intel.c
index 0817751..c012820 100644
--- a/arch/x86/cpu/ivybridge/microcode_intel.c
+++ b/arch/x86/cpu/ivybridge/microcode_intel.c
@@ -120,6 +120,7 @@ int microcode_update_intel(void)
int count;
int node;
int ret;
+ int rev;
microcode_read_cpu(&cpu);
node = 0;
@@ -147,12 +148,16 @@ int microcode_update_intel(void)
skipped++;
continue;
}
- ret = microcode_read_rev();
wrmsr(0x79, (ulong)update.data, 0);
+ rev = microcode_read_rev();
debug("microcode: updated to revision 0x%x
date=%04x-%02x-%02x\n",
- microcode_read_rev(), update.date_code & 0xffff,
+ rev, update.date_code & 0xffff,
(update.date_code >> 24) & 0xff,
(update.date_code >> 16) & 0xff);
+ if (update.update_revision != rev) {
+ printf("Microcode update failed\n");
+ return -EFAULT;
+ }
count++;
} while (1);
}
diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts
index a739080..1ebc334 100644
--- a/arch/x86/dts/link.dts
+++ b/arch/x86/dts/link.dts
@@ -214,9 +214,6 @@
microcode {
update@0 {
-#include "microcode/m12206a7_00000029.dtsi"
- };
- update@1 {
#include "microcode/m12306a9_0000001b.dtsi"
};
};
--
2.2.0.rc0.207.ga3a616c
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
