Hi, On 28 December 2014 at 21:38, Ajoy Das <[email protected]> wrote: > Hi > > Need Help > > I want to run U-BOOT as coreboot payload on QEMU platform > > I am on uboot-x86 git > > Compiled U-BOOT with make coreboot-x86_defconfig and make all > > Running qemu with > qemu-system-i386 -bios ../coreboot/build/coreboot.rom -hda disk.img > -nographic -m 1g > > But The system crashes with the following message > > qemu: fatal: Trying to execute code outside RAM or ROM at 0x5e2a36c2 > > Loading Segment: addr: 0x0000000001110000 memsz: 0x00000000000588e8 filesz: > 0x00000000000252eb > lb: [0x0000000000100000, 0x000000000012b030) > Post relocation: addr: 0x0000000001110000 memsz: 0x00000000000588e8 filesz: > 0x00000000000252eb > using LZMA > [ 0x01110000, 011688e8, 0x011688e8) <- fffd2770 > dest 01110000, end 011688e8, bouncebuffer 3ff77000 > Loaded segments > Jumping to boot code at 01110015 > CPU0: stack: 00126000 - 00127000, lowest used address 00126b8c, stack used: > 1140 bytes > entry = 0x01110015 > lb_start = 0x00100000 > lb_size = 0x0002b030 > buffer = 0x3ff77000 > qemu: fatal: Trying to execute code outside RAM or ROM at 0x5e2a36c2 > > EAX=0000000a EBX=000186a0 ECX=01145d15 EDX=19203eb0 > ESI=00000000 EDI=00000000 EBP=01145f6c ESP=01145f54 > EIP=5e2a36c2 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 > ES =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > CS =0010 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA] > SS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > DS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > FS =0020 19203f5c ffffffff 00cf9300 DPL=0 DS [-WA] > GS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT > TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy > GDT= 19203e60 00000047 > IDT= 00000000 00000000 > CR0=60000033 CR2=00000000 CR3=00000000 CR4=00000000 > DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000 > DR6=ffff0ff0 DR7=00000400 > CCS=00000218 CCD=01145f50 CCO=ADDL > EFER=0000000000000000 > FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80 > FPR0=0000000000000000 0000 FPR1=0000000000000000 0000 > FPR2=0000000000000000 0000 FPR3=0000000000000000 0000 > FPR4=0000000000000000 0000 FPR5=0000000000000000 0000 > FPR6=0000000000000000 0000 FPR7=0000000000000000 0000 > XMM00=00000000000000000000000000000000 > XMM01=00000000000000000000000000000000 > XMM02=00000000000000000000000000000000 > XMM03=00000000000000000000000000000000 > XMM04=00000000000000000000000000000000 > XMM05=00000000000000000000000000000000 > XMM06=00000000000000000000000000000000 > XMM07=00000000000000000000000000000000 > Aborted (core dumped) > > qemu-system-i386 --version > QEMU emulator version 1.0 (qemu-kvm-1.0), Copyright (c) 2003-2008 Fabrice > Bellard > > Is QEMU not supported for coreboot and u-boot
I'm not sure it's been tried but there's no reason why it should work. It seems to be crashing in U-Boot before there is any serial output. Did you put u-boot-dtb.bin as the payload? Regards, Simon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
